How Far From Wall To Install Toilet Flange

Asked past: Kosta Schwarte

asked in category: General Last Updated: 22nd March, 2022

How far does the toilet flange demand to be from the wall?

Standard drywall is ane/ii inch thick, so the plumber should ready the toilet flange at to the lowest degree 15-1/2 inches from the center of the flange to the wall framing. The standard altitude from the back wall is 12 inches, or 12-i/2 inches from the center of the flange to the wall framing.

There are two main ways in which the closet flange is typically installed: above the floor or affluent (level) with the floor. At SUPPLY.com, our PROs typically prefer the first way; nosotros'd like to give an overview of both so that you tin decide which way is all-time for your item bathroom situation.

Secondly, are all toilets the aforementioned distance from the wall? Offset past measuring from the wall behind the toilet to the heart of the bolts at the base of the toilet. If the crude-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the infinite, and you will need to await for a toilet designed for that specific rough-in distance.

In this regard, what is toilet rough in distance?

The toilet rough-in refers to the altitude from the finished wall to the center of the toilet's floor drain or waste matter outlet. Nigh toilets have a rough-in of 12 inches, although it's not uncommon for older homes to have an unusual size such as x" or 14".

How do you rough in a toilet flange?

Cutting a hole in the subfloor but large enough for the lesser office of the toilet flange to sit. The flange rim will be attached to the finished flooring later. The eye of the toilet flange should be 12" from the finished wall (add a ane/2" for drywall if measuring from the framing).

36 Related Question Answers Constitute

Does the toilet flange go on top of tile?

The toilet flange needs to exist on top of the finished flooring. Meaning the bottom border of the flange needs to exist on the same plane equally the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile besides.

How high should the toilet flange be above the flooring?

With the toilet removed, you lot can see the toilet flange and measure its height above the floor. Optimum flange height to aim for is ane/iv inch to a higher place the finished floor. This typically allows for about any type of wax band to be used and still ensure a skillful seal.

Should I caulk around toilet flange?

Some people prefer to caulk all around the toilet and go out well-nigh a i-inch gap in the caulk at the back of the toilet to allow h2o to escape out in the event of a leak. Information technology'due south already tough enough to caulk backside a toilet, so if this is what you want to do, God anoint. Just don't go crazy with the caulk.

Does a toilet flange need to be screwed to the floor?

5 Answers. The bottom of the flange needs to be sitting flush with (or not more than 1/8" above) the finished floor or else the toilet will rock. The flange should exist fastened to the floor. Dry fit the toilet to brand sure it doesn't rock.

Can you install a toilet without a flange?

2 Answers. The flange and accompanying bolts hold the toilet firmly to the flooring and keeps the seal between the toilet and the flooring. Without the flange or if information technology is broken, he would have to attach the toilet to the subfloor with wood screws, and if the flooring is rotting out, those won't final long.

Should a toilet tank bear on the wall?

No, at that place is no standard distance a toilet tank should set out from the wall. There are standard rough in distances, the virtually common is 12" with a few at 10" and a few at 14", but the really altitude the tank will exist from the wall will vary. Yours is quite normal.

How exercise I know the rough in size of my toilet?

To detect out your toilet's rough-in, mensurate from the wall backside the toilet to the eye of the closet bolts, which hold your toilet to the floor. That distance will likely exist a bit more than the standard 10″, 12″, or fourteen″ crude-in dimensions. Round your measurement downwards to the nearest standard crude-in.

What does 10 inch rough in mean for toilet?

Toilet rough in measuring: from wall to bolt cap. When talking toilets, the toilet rough in is the distance from the wall behind the toilet to the center of the outlet pipe where the waste leaves the toilet. For those cases, toilets are available with a 10-inch rough or fourteen-inch rough.

What is the divergence betwixt a x inch and 12 inch crude in toilet?

Different Rough-in Measurements A 10-inch rough-in is the usual measurement installed in older homes. Even so, the 12-inch measurement is the standard for modern toilet plumbing. The ten-inch rough-in measurements are yet sometimes found in homes, and a lesser number of toilets are normally available for them.

What is the deviation between a x and 12 rough in toilet?

Those numbers are a measure of the distance between the wall and the centre of the closet flange (aka, where the johnny bolts that secure the toilet bowl go). Near toilet bowls will work with either a 10″ or a 12″ distance, only a 10″ rough tank is slimmer to allow for the decreased distance.

Source: https://askinglot.com/how-far-does-the-toilet-flange-need-to-be-from-the-wall

Posted by: perduewopmetuand.blogspot.com

Share this post